Friday, October 22, 2010

Construction Update 10/22/10

The Zippin Pippin roller coaster structure now includes some turns!

The structure for turn 1 and turn 3 is about 75% complete as of today.  The roller coaster structure is even more impressive now and really makes a statement at Bay Beach.  It was a beautiful fall day today but this weekend it's going to turn cold and wet; hopefully that won't slow the crews down too much next week.  Let's get to the pictures of all of the new additions since last week.

The big addition this week is the structure to support turn 1 and turn 3.  Turn 1 is at the start of the ride, it carries you around a 180° turn and into the lift hill. Turn 1 runs right through the structure of turn 3 which is nearly directly above it.  Turn 3 is an elevated turn that comes right after the uphill after the first drop, it is another 180° turn that ends with another drop that then takes you to the out and back part of the roller coaster.  Enough words here is what it all looks like.

The overall turn structure looks like this.  The upper portion is turn 3 and if you look near the bottom you can see the opening in the structure for turn 1.

From Zippin Pippin Construction

If you look closely near the start of turn 1 you can see the slight downhill that gives the train enough momentum to get around turn 1 and into the chain lift.

From Zippin Pippin Construction

This next shot is standing right where the center of the track would be very near the front car as the roller coaster is about to start it's circuit.

From Zippin Pippin Construction

The structure for the loading platform is also taking shape, these cantilevered beams will support the loading platform. I believe sections of track for moving trains on and off the track will be stored under the cantilevered platform and be able to roll into the main line of the track for adding and removing trains.

From Zippin Pippin Construction

There are still several bents laying around the turn 3 area to help complete the turn. I would expect turn 3 to be complete by next week, assuming the weather doesn't slow things down too much.

From Zippin Pippin Construction

This next shot is standing outside of turn 3 looking towards the West, what an awesome structure!

From Zippin Pippin Construction

This picture is taken outside of the transfer/loading platform area looking south. This opening in the structure will be used to get trains into and out of the ride; this is required because these sections are inside of the main structure of the ride.

From Zippin Pippin Construction

These "V" shaped steel pieces will allow "V" shaped rollers to shuttle sections of track into the roller coaster circuit and out of it. This will allow trains to be added or removed from the track.

From Zippin Pippin Construction

From Zippin Pippin Construction

I couldn't resist leaning into the bottom of the first drop and getting another image looking up the first hill and up the uphill leading into turn 3.

From Zippin Pippin Construction

From Zippin Pippin Construction

All of the footings are now in place for turn 2, this is an elevated turn right after the lift hill before the first drop.

From Zippin Pippin Construction

All of the standing structure is visible in this view taken looking East.

From Zippin Pippin Construction

This familiar view looking down the brake run heading into the transfer station is now enhanced with the addition of turn 3 in the background.

From Zippin Pippin Construction

Earth moving continues out in Zone 3, no actual footings or forms are in place yet but they are starting to mark some areas and some rebar has been moved to the extreme end of the out and back.

From Zippin Pippin Construction

From Zippin Pippin Construction

From Zippin Pippin Construction

This next picture gives you an idea of the amount of bank near the end of turn 3, one would have to assume the train will be picking up some good speed in this area!

From Zippin Pippin Construction

The break between the footings in this area will be the entrance and exit to the roller coaster queue.

From Zippin Pippin Construction

These concrete pads are the foundation for the backup generator and the lift motor.

From Zippin Pippin Construction

This section of the blueprint shows the areas above.

From Zippin Pippin Construction

I noticed a curved section of a ratchet bar I hadn't seen on site before. This should be the last section of ratchet bar right at the top of the lift hill, where this section ends should also be the bent many of the people of Green Bay signed a few weeks ago.

From Zippin Pippin Construction

Of course I had to take one last picture of the standing structure before leaving the site, that's all for this week, be sure to check back again next week for more news.

From Zippin Pippin Construction

6 comments:

  1. First off like to say nice job on the updates, I am not sure what you know about the future plans or layouts of the park. But I am wondering if you think that the opening in the track leading in to the 3rd corner is also for the train track when they redo the tracks in the future? I have seen a general overview of the park and it shows the new train tracks going thru the roller coaster. Interested in hear your thoughts on it.

    ReplyDelete
  2. Thanks for the comment, the opening leading in to the 3rd corner is only for moving trains into and out of the transfer area. There is an area on the out and back part of the coaster where the train will eventually pass through. Check out the "Bonus Post 10/9/10" I have a shot of the plans showing where the pass through will be. When they start constructing that area I'll be sure to get a picture of it and point it out on a future post. Thanks for reading.

    ReplyDelete
  3. HI Tim thanks for all the up dates I grew up on the pipen i lived two blocks from the fairgrounds in memphis.I live up north for 40 years 2hrs away i wont to be one of the first lucky one to ride it down .help me to get hold of the one in charge thanks

    ReplyDelete
  4. Continued r7m73i4c59 replica designer bags replica bags louis vuitton replica bags aaa quality go to these guys r6k68z3g71 replica bags paypal accepted replica bags lv that site j7e86j8s88 replica bags on amazon

    ReplyDelete